Storm produces customized flags with carbon fiber structure (Beachflag CARBON) suitable for installations that require complex logistics. CARBON beach flags are mainly used in events placed in location with particular conditions.
Beachflag CARBON frameThe plus of this type of beach flag are the low weight and small size. The mast is very light thanks to the construction in carbon fiber, and the flexible end-part allows to minimize the overall dimensions of the product when packed.
The customized flag is printed in digital sublimation without limits of colors or graphics and is made with a tunnel in elastic tape (white or black) or in printed fabric. The printed flag can be made in nautical flag fabric or mesh flag fabric.
Nautico flag fabric
Mesh flag fabric
The printed beach flags are customized not only in graphics but also in shape. You can choose between different flag formats and frame sizes. The following formats are available: standard beach flag, round beach flag; beachflag angle; beachflag wind and beachflag feather. In the teardrop flagpole variant the following formats are available: beachflag drop. The rectangular flagpole format is not possible beacause of the flexible structure, , but it is available in the ALU beachflag line: model beachflag rectangular.
Beachflag CARBON Angle
Beachflag CARBON Round
Beachflag CARBON Standard
Beachflag CARBON Wind
Beachflag CARBON Feather
Beachflag CARBON Drop
There are different bases for customized beach flags depending on the use and the positioning of the flag. The beach flags can be used both indoors and outdoors. In case of wind the structure is free to rotate thanks to the rotating mechanism integrated in each base of the beachflag carbon line. The bases available are as follows: ground spike, steel screw, crossbase, floodable black base, steel flat base, water weight.
Ground spike with rotator Beachflag CARBON
Steel screw with rotator Beachflag CARBON
Crossbase with rotator Beachflag CARBON
Floodable black base 30L Beachflag CARBON
Steel flat base 6,5 Kg with rotator Beachflag CARBON
Storm produces customized flags with aluminum structure (Beachflag ALU) suitable for all uses. Beach flags are used in the most various sectors, from setting up events and exhibitions, to fairs, points of sale and promotional corners.
The customized flag is printed in digital sublimation without limits of colors or graphics and is packaged with a tunnel of elastic tape(white or black) for the insertion of the pole. The printed flag can be made on nautical flag fabric or mesh fabric.
Nautico flag fabric
Mesh flag fabric
The printed beach flags are customized not only in graphics but also in shape. You can choose between different flag formats and frame sizes. A lot of shape and size are available: standard beachflag, round beachflag, beachflag angle, beachflag wind. In the drop flagpole variant the following formats are available: beachflag wing, beach flag bow, beachflag drop. In the classic format for institutional flags with rectangular flagpoles, the format available is: beachflag rectangular.
Beachflag ALU Wind
Beachflag ALU Standard
Beachflag ALU Round
Beachflag ALU Angle
Beachflag ALU Drop
Beachflag ALU Rectangular
The customized beach flags ALU are made entirely of aluminum. The upper part is made with a pre-curved mast in order to support the flag avoiding breackage. The tubular structure is equipped with clip-lock sustem that guarantee maximum safety and speed in the assembly / disassembly of the structure.
No keys are required for assembly, setting up the beach flag is quick and easy. Just connect the tubes together, insert the flag, and adjust the tension thanks to the mobile hook.Bechflag ALU FrameDifferent bases for customized beach flags ALU are available depending on the use and positioning of the flag. The beach flags can be used both indoors and outdoors. In case of wind the structure is free to rotate thanks to the lower damping system. The bases available are the following: ground spike, wheel base/car stand, floodable black base, cross base, water weight, flat steel plate.
Storm designs, manufactures and prints customized flags for each type of structure. The flagpole flags are tailor made to adapt to any type of support.
Custom advertising flagpole flags
The two most common types of flagpoles are with pulley or with swiveling upper arm. Each flagpole requires a flag with a custom finish. A reinforcement tape is always sewn on the vertical side of the pole, and then all the accessories necessary for fixing are applied. Depending on the structure, we finish the flag with plastic or metal carabiners, plastic or metal eyelets, velcro or fabric laces, cords. In the case of flagpoles with a swiveling upper arm, we realize a hemmed pocket of suitable diameter; the hemmed pocket can be opened on both sides, or closed on the outside. For special packages the hemmed pocked can be reinforced with a double fabric.
The uses of the flagpole flags are the most varied. They are mainly used in the automotive sector. We print flags with the logos of the car manufacturers or the various dealerships.
Another typical use is for institutional flagpoles. The flagpoles are positioned outside the companies to give greater visibility to their brand. Often the flagpoles are more than one, so the flag printed with the company logo are added with other graphics such as country flags, state flags, municipal flags etc.
The flag are digitally printed, using the sublimation process. For large quantities, and for graphics with few number of colors, it may be appropriate to screen-print the advertising flags.
Storm is specialized in the production and customization of advertising flags.
Among the countless technical solutions that the market offers for personalization, we believe that sublimation printing is the winning choice for this product. The sublimation printing allows to obtain a double-sided image close to 100% visibility, and to customize the flags without color or image limits. The image imprinted on the fabric will be visible from both sides.
Digital printing allows you to print custom flags, promotional flags, flags of nations, advertising flags, flagpole flags, flags with logos, with no restrictions of colors, images or quantities. This production flexibility represents a plus in advertising printing.
The most common fabrics for making flags are the nautico flag fabric or mesh flag. The mesh fabric is chosen in case the flag must be placed in very windy places, and with bad weather conditions. The holes allow to reduce the impact of the wind on the fabric, guarantee of a longer life than the nautical flag.
Nautico flag fabric
Mesh fabric
The maximum print height of the single piece is: 320 cm for the nautical flag fabric, 310 cm for the mesh fabric, for the desired length. In the case of productions with higher heights, junction sewing will be made. Thanks to this large printing area we can cover all needs in the production of customized flags.
After the printing process, the fabric is cut and made.
For the finishes you can apply eyelets, carabiners, hemmed pocket, tapes, cords, laces, keder, and reinforcement seams.
Thanks to taylor made finishes we can adapt the flags to any support. The tailor-made packaging guarantees maximum compatibility of the flags with all the structures.
We use cookies to make sure you can have the best experience on our site. If you continue to use this site we will assume that you are happy with it.OkLeggi di più
